VHF AND UHF DIGITAL REPEATERS
IC-FR5300
IC-FR6300
NXDN Version
Two Channels in One Box Repeater, Compatible with Affordable Digital Simulcast
One Platform for All Your System Configurations
The FR5300 is a second generation IDAS™ repeater that builds upon the powerful product line with the affordable, low complexity digital simulcast capabilities and a new CPU/FPGA platform. Increase coverage with simulcast by adding repeaters to pair on the same networks.
VHF IDAS DIGITAL
IC-FR5300
UHF IDAS DIGITAL
IC-FR6300
Completely New CPU/FPGA Platform
The IC-FR5300 series is the second generation IDAS™ Repeater, keeping system compatibility with the original IC-FR5000 series and continuing its unique package. It looks the same as the IC-FR5000, but a new CPU/FPGA platform is used. The IC-FR5300 series provides digital simulcast system capability and ±0.1 ppm high frequency stability with a 1 pps reference signal from the GNSS antenna.
System Scalability
The IC-FR5300 series can be easily upgraded by installing an optional UC-FR5300 Network/controller board and software provided with a CF card. Depending on the communication density and coverage, your radio system can grow from a single site to a simulcast system or multi-site trunking* system, to match your communication needs.
* Compatible IDAS radio terminals are required for multi-site trunking.
| System | Optional Network/Controller Board |
|---|---|
| Simulcast Conventional | UC-FR5300 #14 (Supplied with a CF-FR5300SC) and UX-241 GNSS antenna |
| Multi-site Conventional | UC-FR5300 #12 (Supplied with a CF-FR5000MC) |
| Single site Trunking | UC-FR5300 #11 |
| Multi-site Trunking | UC-FR5300 #13 (Supplied with a CF-FR5000MT) |
D-SUB 25-Pin Accessory Connector
The IC-FR5300 series has a programmable D-SUB 25-pin accessory connector for connecting an external remote control devices. Also, modulation/demodulation signals can be input/output from the D-SUB connector.
50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*
Employing a high performance power amplifier, the IC-FR5300 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.
* 25 W output power depending on the repeater version. Ambient temperature: 25°CAmbient temperature: 25°C
50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*
When need higher power, the optional UR-PA5000/UR-PA6000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.
* Ambient temperature: 25°C
Capable of Installing Two RF modules in One Chassis
The IC-FR5300 series has an internal space for installing another RF unit. Two RF modules* can be installed and operated independently. LEDs on the front panel shows the status of both channel.
* Optional UR-FR5300/UR-FR6300 required.
Digital/Analog Mixed Mode and Multiple Tone-Group Using CTCSS, DTCS Tone and RAN
The IC-FR5300 series can receive both analong and digital modes on a channel, and transmit either mode, depending on the programming. It decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code.
32 Channel Capacity and 5 Programmable Buttons
The 12-digit alphanumeric display, 5 programmable buttons, 32 memory channels and internal speaker enable you to use the repeater as a simple base station, or to check repeater activity. The LCD shows a variety of text and code information.
IP Remote Maintenance
When the IC-FR5300 series is connected to an IP network through the optional UC-FR5300 network/controller board, PC programming and IP address setting can be made from a remote location. The SNMP traps and Syslog can be sent to your manager for remote monitoring.
Other Features
- 19-inch rack mount 2U height low profile
- Receiver voting function improves talkback capability of radio terminals in the field
- RC-FS10 remote communicator software works as a simple dispatch station to communicate with radio terminals through the repeater
- CW ID transmitter
- PTT priority setting (Local Microphone, external PTT or repeater operation)
- 5-Tone decoder* (* For analog mode only)
- DTMF encoder/decoder
- Low voltage alert
Rear Panel View
General
| IC-FR5300 | IC-FR6300 | |||
|---|---|---|---|---|
| Frequency coverage (Varies according to version) |
136-174 MHz (USA, EXP, EUR, CAN, AUS) |
400-470 MHz (USA, EXP, EUR, CAN) |
||
| Number of channels |
32 channels / 1 zone |
|||
| Channel spacing (Varies according to version) |
6.25/12.5/25 or 7.5/15/30 kHz |
|||
| Type of emission |
16K0F3E*1 (25 kHz), |
|||
| Power supply requirement |
13.6 V DC (USA, CAN, EXP) |
|||
| Current drain (at 13.6V DC) |
Tx High |
15.0 A maximum (at 50 W) |
||
| Rx | Stand-by |
500 mA (FAN OFF) |
||
| Max. audio |
1900 mA |
|||
| Dimensions (projections not included; W×H×D) |
IC-FR5300/IC-FR6300 |
483 × 88 × 260 mm, 19.0 × 3.5 × 10.2 in |
||
| UR-FR5300/UR-FR6300 |
176×60×194 mm, 6.9 × 2.4 × 7.6 in |
|||
| Weight (approx.) | IC-FR5300/IC-FR6300 |
5.78 kg, 12.7 lb |
||
| UR-FR5300/UR-FR6300 |
2.1 kg, 4.6 lb |
|||
| Operating temperature range |
-30℃ to +60℃, –22 °F to +140 °F (USA, CAN, EXP) |
|||
*1 25 kHz bandwidth is not available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25 kHz bandwidth.
Transmitter
| IC-FR5300 | IC-FR6300 | |
|---|---|---|
| RF output power (Hi, L2, L1) (Varies according to version) |
50 W, 25 W, 5 W (USA, EXP, CAN, AUS Versions) |
|
| Spurious emissions |
80 dB typ. (TIA-603) |
|
| Frequency stability |
±1.0 ppm or less |
|
| Audio harmonic distortion |
0.9% typ. (AF 1kHz 40% deviation)(TIA-603) |
0.8% typ. (AF 1kHz 40% deviation)(TIA-603) |
| FM Hum and Noise |
83 dB typ. (W) |
72 dB typ. (W) |
Receiver
| IC-FR5300 | IC-FR6300 | ||
|---|---|---|---|
| Sensitivity | Digital (1% BER) |
–4.0 dBμV (0.32 μV) emf typ. (EN301 166) |
–3.5 dBμV (0.33 μV) emf typ. (EN301 166) |
| Analog (12 dB SINAD) |
–119 dBm (0.25 μV) typ. (TIA-603) |
–117 dBm (0.32 μV) typ. (TIA-603) |
|
| Analog (20 dB SINAD) |
–4.0/–4.0/–1.0 dBμV emf typ. (W/M/N)(EN300 086) |
–3.0/–3.0/0.0 dBμV emf typ. (W/M/N)(EN300 086) |
|
| Adjacent channel selectivity |
Digital |
66 dB typ. (EN301 166) |
63 dB typ. (EN301 166) |
| Analog |
85/80 dB typ. (W/N)(TIA-603) |
80/56 dB typ. (W/N)(TIA-603) |
|
| Spurious response rejection |
Digital |
87 dBμV emf typ. (EN301 166) |
85 dBμV emf typ. (EN301 166) |
| Analog |
85 dB typ.(TIA-603) |
84 dB typ.(TIA-603) |
|
| Intermodulation rejection |
Digital |
78 dBμV emf typ. (EN301 166) |
78 dBμV emf typ. (EN301 166) |
| Analog |
81/81 dB typ. (W/N)(TIA-603) |
80/80 dB typ. (W/N)(TIA-603) |
|
| AF output power |
3.9 W typ. (at 5% distortion with a 4Ω load) |
||
Measurements made in accordance with TIA-603, EN300 086 and EN301 166.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure Storage |
500.5 |
I |
| Low Pressure Operation |
500.5 |
II |
| High Temperature Storage |
501.5 |
I |
| High Temperature Operation |
501.5 |
II |
| Low Temperature Storage |
502.5 |
I |
| Low Temperature Operation |
502.5 |
II |
| Temperature Shock |
503.5 |
I-C |
| Solar Radiation |
505.5 |
I |
| Humidity |
507.5 |
II |
| Dust Blowing |
510.5 |
I |
| Vibration |
514.6 |
I |
| Shock Functional |
516.6 |
I |
All stated specifications are subject to change without notice or obligation.
MICROPHONES
EXTERNAL SPEAKERS
SOFTWARE
CHANNEL MODULES
GPS ANTENNAS
INTERNAL UNITS
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| IDAS™ Digital Simulcast | 1.71MB |
| IC-FR5300/IC-FR6300 | 1.31MB |
| Business Solution Catalogue | 59.73MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTRUCTION MANUAL | IC-FR5300/IC-FR6300 |
Close