Features
Advanced Remote Control of the IC-PW2
The RS-PW2 enables full remote control of all IC-PW2 functions, including Power ON/OFF, from your Windows™ PC.
- Control amplifier power ON/OFF
- View various meters (RF power, SWR, ALC level, Vd, Id) with a choice of needle or multi-function type meter
- Select the RF input (Exciter 1 or 2)
- Select the antenna connector (ANT 1 ~ ANT 6)
- Select the Antenna Tuner setting (ON/OFF/Tune)
- Switch Max Power setting (500 W or 1 kW)*
*This item can be set when the IC-PW2, Linear Amplifier is connected to a 180 ~ 264 V AC power source. - Select the Antenna Memory setting for each frequency band (1.8 MHz ~ 50 MHz)
- Monitor operating frequency and TX/RX status
- Display Temperature and Humidity information
Needle Type Meter
Multi-Function Meter
Antenna Select
Set Menu
Remote Operation over the Internet/LAN
With the RS-PW2 remote control software installed on your PC, the IC-PW2 linear amplifier can be remotely operated through your home network or over the Internet from a remote location. When used together with the RS-BA1 or the IC-7760 remote controller (RC-7760), it supports advanced high-power operation from your remote shack.
System Requirements
| Operating system |
|
|---|---|
| CPU | 1.8 GHz Processor or better (multi-core for Windows 11) |
| Memory |
Windows 11 (64-bit): 4 GB or more, |
| Disk space (HDD/SSD) | 200 MB or more of available disk space |
| Network data speed | Upload: 50 kbps or higher (to the IC-PW2) Download: 100 kbps or higher (to the client PC) (For optimal performance, we recommend a network environment with adequate and stable connection speed.) |
| Display resolution | 1024 × 600 pixels or higher |
| Other | To use this software, the IC-PW2 must be updated to firmware version 1.30 or later. |
Download
RS-PW2
POWER AMPLIFIERS
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| RS-PW2 Brochure | 2.07MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTRUCTION MANUAL | RS-PW2 |
Firmware / Software
| Type | Model Name | Version | Last Update |
|---|---|---|---|
| Firmware | IC-PW2 | Version 1.30 | Apr.30.2025 |